This Data Release contains an updated version of the San Andreas catalog of low-frequency earthquakes (LFEs): Shelly, D. R. (2017), A 15 year catalog of more than 1 million low-frequency earthquakes: Tracking tremor and slip along the deep San Andreas Fault, J. Geophys. Res. Solid Earth, 122, 3739–3753, doi:10.1002/2017JB014047. This catalog contains 88 LFE families, with each family consisting of events detected by cross-correlation with the associated waveform template. These templates were identified and located by Shelly and Hardebeck (2010): Shelly, D. R., and J. L. Hardebeck (2010), Precise tremor source locations and amplitude variations along the lower-crustal central San Andreas Fault, Geophys. Res. Lett., 37, L14301, doi:10.1029/2010GL043672. For completeness, we repeat the original catalog information provided in the supplement of Shelly (2017) below, with minor modifications: Catalog Time-Period and Format: The low-frequency earthquake catalog spans from April 2001 to 30 April 2024 and contains 1,528,117 events. Format: YYYY MM DD s_of_day HH mm ss.ss ccsum meancc med_cc seqday ID latitude longitude depth n_chan Explantions: YYYY MM DD (year month day) - Event time (template start time in UTC - ~1s prior to first S-wave arrival time at an HRSN station) s_of_day - Event time (template start time in UTC - ~1s prior to first S-wave arrival time at an HRSN station), second of the day (i.e. 0-86400), HH mm ss.ss (hour, minute, second) - Event time (template start time in UTC- ~1s prior to S-wave arrival time at first HRSN station) ccsum - correlation sum across all stations (must exceed 4.0) meancc - mean correlation among stations with data med_cc - median correlation seqday - sequential day since March 1, 2001 ID - reference ID of family latitude longitude depth - estimated location for that family (Shelly and Hardebeck, 2010) n_chan - number of data channels existing for event (some channels may exist, but not have good data) Family IDs: Each family has an associated identification code, which is a number followed by 1-4 ‘s’. The family IDs are almost meaningless and are simply used as unique identifiers. Originally the numeric code was taken from the second of the day at which the initial template for this family occurred. The number of ‘s’ indicates the number of iterations of stacking and cross-correlation that were applied to derive the template waveforms (see Methods). The lower amplitude and more distant sources typically benefitted from multiple iterations of stacking and cross correlation, before the final template stabilized in its detection set. Data channels Used (station.channels): GHIB.13, EADB.123, JCSB.1, FROB.123, JCNB.123, VCAB.123, MMNB.123, CCRB.123, LCCB.123, SMNB.123, RMNB.123, SCYB.123 JCNB failed in 2008 and was replaced by a shallow sensor. New sensor not used. RMNB failed in 2011 and was not replaced. GHIB.2 was never operational JCSB.23 have poor signal to noise and are not used. VARB was replaced with a new sensor at a new depth in 2003, and this station was not used in original template formation. As of 2024, detection capabilities were substantially degraded with a maximum of 16 channels of data available for detection. This is due to outages in GHIB (since 2020), FROB (since 2023), VCAB (since 2023), and CCRB (since 2022), in addition to the outages described above. It is unclear when/if these stations might be repaired in the future. Channel swap on FROB, VCAB (after BP->SP channel swap, before 2011-7-14): 2011/4/21-2011/7/14: Swap VCAB.2 and VCAB.3 2010/11/10-2011/7/14: Swap FROB.2 and FROB.3 Disregard mean correlation, enforce network correlation sum only (because of poor but present data): 2012/2/13-2014/4/23 Polarity corrections during initial processing: CCRB.123, correct for reversed polarity from 2001-6-1 to 2001-12-13. FROB.123, correct for reverse polarity from 2010/12/10-2011/4/7 MMNB.123, correct for reverse polarity from 2010/12/10-2011/4/7 FROB.23, correct for reverse polarity from 2010/4/8 to 2011-7-14 Polarity corrections applied in post-processing (these are minor and done after initial detection stage): 2011-4-7 to 2011-5-27: zero FROB.2 channel (wiring mistake, FROB.2 duplicates FROB.3) 2005/4/11-2005/5/13: reverse GHIB.13 2005/12/15-present: reverse GHIB.3 2002/11/22-2003/1/16: reverse EADB.2 2002/11/21-2003/1/17: reverse VCAB.3