U.S. flag

An official website of the United States government

icon-dot-gov

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

icon-https

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Digital elevation model, in meters, of the bathymetry of Dierks Lake, Arkansas

The dataset is a digital elevation model (DEM), in GeoTiff format, of the bathymetry of Dierks Lake, Howard and Sevier Counties, Arkansas. The extent of the DEM represents the area encompassing the extent of the aerial Light Detection And Ranging (LiDAR) data used in the project. Horizontal and vertical units are expressed in meters. The DEM was derived from an LAS dataset (an industry-standard binary format for storing aerial LiDAR data) created from point datasets stored in “Dierks2018_gdb”. The point datasets include aerial LiDAR data from a survey conducted in 2016 by the National Resources Conservation Service (U.S. Geological Survey, 2017), point data from digitized historical topographic maps, and bathymetric data from a survey conducted in June 2018 by the Lower Mississippi-Gulf Water Science Center of the U.S. Geological Survey (USGS) using methodologies for single- and multi-beam sonar surveys similar to those described by Wilson and Richards (2006) and Richards and Huizinga (2018). In April 2019, it was discovered that some of the bathymetric data collected in shallow and/or tree-ridden areas of the lake had been omitted, resulting in errors in the final products. The missing data were located and added to the geodatabase, the final products re-created, metadata edited accordingly, and the data release reviewed. In response to the second review, in select shallow and/or tree-ridden tributary arms of the lake where bathymetric data were sparse, points along the stream channels, digitized from historical topographic maps representing the pre-impoundment topography, were added to the dataset; select areas of erroneous bathymetric data were edited; and contours at the dam were adjusted based on the historical topographic maps. First release: March 2019; revised August 2019 (version 1.1). The previous version can be obtained by contacting the USGS Lower Mississippi-Gulf Water Science Center using the "Point of Contact" link on the landing page on ScienceBase. References: Richards, J.M. and Huizinga, R.J., 2018, Bathymetric contour map, surface area and capacity table, and bathymetric difference map for Clearwater Lake near Piedmont, Missouri, 2017: U.S. Geological Survey Scientific Investigations Map 3409: 1 sheet, https://doi.org/10.3133/sim3409; U.S. Geological Survey, 2017, Lidar Point Cloud - USGS National Map 3DEP Downloadable Data Collection: U.S. Geological Survey, https://nationalmap.gov/3DEP; Wilson, G.L., and Richards, J.M., 2006, Procedural Documentation and Accuracy Assessment of Bathymetric Maps and Area/Capacity Tables for Small Reservoirs: U.S. Geological Survey Scientific Investigations Report 2006-5208, https://pubs.usgs.gov/sir/2006/5208/.

Get Data and Metadata
Author(s) Daniel M Wagner orcid, Amanda R Whaling orcid
Publication Date 2019
Beginning Date of Data 2018-06-28
Ending Date of Data 2018-07-02
Data Contact
DOI https://doi.org/10.5066/P9PB1TE8
Citation Wagner, D.M., and Whaling, A.R., 2019, Digital elevation model, in meters, of the bathymetry of Dierks Lake, Arkansas: U.S. Geological Survey data release, https://doi.org/10.5066/P9PB1TE8.
Metadata Contact
Metadata Date 2020-08-21
Related Publication
Citations of these data No citations of these data are known at this time.
Access public
License http://www.usa.gov/publicdomain/label/1.0/
Loading...
Harvest Source: ScienceBase
Harvest Date: 2021-11-19T04:42:53.907Z