The 2014 update of the U.S. Geological Survey (USGS) National Seismic Hazard Model (NSHM) for the conterminous United States (2014 NSHM; Petersen and others, 2014; https://pubs.usgs.gov/of/2008/1128/) included probabilistic ground motion maps for 2 percent and 10 percent probabilities of exceedance in 50 years, derived from seismic hazard curves for peak ground acceleration (PGA) and 0.2 and 1.0 second spectral accelerations (SAs) with 5 percent damping for the National Earthquake Hazards Reduction Program (NEHRP) site class boundary B/C (time-averaged shear wave velocity in the upper 30 meters [VS30]=760 meters per second [m/s]). This data release provides 0.1 degree by 0.1 degree gridded seismic hazard curves, 0.1 degree by 0.1 degree gridded probabilistic ground motions, and seismic hazard maps calculated for additional periods and additional uniform NEHRP site classes using the 2014 NSHM. For both the central and eastern U.S. (CEUS) and western U.S. (WUS), data and maps are provided for PGA, 0.1, 0.2, 0.3, 0.5, 1.0, and 2.0 second SAs with 5% damping for the NEHRP site class boundary B/C for 2, 5, and 10% probabilities of exceedance in 50 years. The WUS additionally includes data and maps for 0.75, 3.0, 4.0, and 5.0 SAs. The use of region-specific suites of weighted ground motion models (GMMs) in the 2014 NSHM precluded the calculation of ground motions for a uniform set of periods and site classes for the conterminous U.S. At the time of development of the 2014 NSHM, there was no consensus in the CEUS on an appropriate site-amplification model to use, therefore, we calculated hazard curves and maps for NEHRP Site Class A (VS30 = 2000 m/s), for which most stable continental GMMs were original developed, based on simulations for hard rock conditions. In the WUS, however, the GMMs allow amplification based on site class (defined by VS30), so we calculated hazard curves and maps for NEHRP site classes B (VS30 = 1080 m/s), C (VS30 = 530 m/s), D (VS30 = 260 m/s), and E (VS30 = 150 m/s) and site class boundaries A/B (VS30 = 1500 m/s), B/C (VS30 = 760 m/s), C/D (VS30 = 365 m/s), and D/E (VS30 = 185 m/s). Further explanation about how the data and maps were generated can be found in the accompanying U.S. Geological Survey Open-File Report 2018-1111 (https://doi.org/10.3133/ofr20181111). First Posted - July 18, 2018 Revised - February 20, 2019 (ver. 1.1)