Spatial Extent of Data
USGS Data Source
USGS Thesaurus Keywords
Place Keywords
Inundation layers for the Sabine River and tributaries for the August and September 2017 flood event in Texas
Hurricane Harvey made landfall near Rockport, Texas on August 25 as a category 4 hurricane with wind gusts exceeding 150 miles per hour. As Harvey moved inland the forward motion of the storm slowed down and produced tremendous rainfall amounts to southeastern Texas and southwestern Louisiana. Historic flooding occurred in Texas and Louisiana as a result of the widespread, heavy rainfall over an 8-day period in Louisiana in August and September 2017. Following the storm event, U.S. Geological Survey (USGS) hydrographers recovered and documented 2,123 high-water marks in Texas, noting location and height of the water above land surface. Many of these high-water marks were used to create flood-inundation maps for selected communities of Texas that experienced flooding in August and September, 2017. The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the Sabine River and tributaries within the communities in Jasper, Newton, Orange, and Jefferson Counties, Texas, and Beauregard, Calcasieu, and Cameron Parishes, Louisiana. The mapped area of the Sabine Basin was separated into three sections due to the availability and location of high-water marks; upper, middle, and lower. Selected tributaries to the Sabine, Big Cow Creek and Cow Bayou were also mapped. These geospatial data include the following items: 1. bnd_sabine_upper, bnd_sabine_middle, bnd_sabine_lower, bnd_bigcowcreek, bnd_cowbayou; shapefiles containing the polygon showing the mapped area boundary for the upper, middle, and lower Sabine River, Big Cow Creek, and Cow Bayou flood maps, 2. hwm_sabine_upper, hwm_ sabine _middle, hwm_ sabine _lower, hwm_bigcowcreek, and hwm_cowbayou; shapefiles containing high-water mark points used for inundation maps, 3. polygon_ sabine _upper, polygon_ sabine _middle, polygon_ sabine _lower, polygon_bigcowcreek, and polygon_cowbayou; shapefiles containing mapped extent of flood inundation for the upper, middle, and lower Sabine River, Big Cow Creek, and Cow Bayou, derived from the water-surface elevation surveyed at high-water marks, and 4. depth_upper, depth_middle, depth_lower, depth_bigcow, and depth_cow; raster files for the flood depths derived from the water-surface elevation surveyed at high-water marks. The upstream and downstream mapped area extent is limited to the upstream-most and downstream-most high-water mark locations. In areas of uncertainty of flood extent, the mapped area boundary is lined up with the flood inundation polygon extent. The mapped area boundary polygon was used to extract the final flood inundation polygon and depth raster from the water-surface elevation raster file. Depth raster files were created using the "Topo to Raster" tool in ArcMap (ESRI, 2012). These data show the area of inundation within communities along the Sabine River and tributaries in Texas. The polygon shapefiles were created to provide an extent of flood inundation along the Sabine River and tributaries within communities in Newton, Orange, and Jefferson Counties, Texas, and Beauregard, Calcasieu, and Cameron Parishes, Louisiana. The HWM elevation data from the USGS Short-tern Network (STN) was used to create the flood water-surface raster file (U.S. Geological Survey [USGS], 2018, Short-Term Network Data Portal: USGS flood information web page, accessed February 13, 2018, at https://water.usgs.gov/floods/FEV.). The water-surface raster was the basis for the creation of the final flood inundation polygon and depth layer to support the development of flood inundation map for the Federal Emergency Management Agency's (FEMA) response and recovery operations.
Author(s) |
Kara M Garvin |
Publication Date | 2018 |
Beginning Date of Data | 2017-08-25 |
Ending Date of Data | 2017-09-01 |
Data Contact | |
DOI | https://doi.org/10.5066/F7VH5N3N |
Citation | Garvin, K.M., 2018, Inundation layers for the Sabine River and tributaries for the August and September 2017 flood event in Texas: U.S. Geological Survey data release, https://doi.org/10.5066/F7VH5N3N. |
Metadata Contact | |
Metadata Date | 2020-08-27 |
Related Publication | Loading... |
Citations of these data | Loading https://doi.org/10.1016/J.IJDRR.2022.103185 Loading https://doi.org/10.1080/17538947.2020.1729879 Loading https://doi.org/10.3133/sir20185070 |
Access | public |
License | http://www.usa.gov/publicdomain/label/1.0/ |
Harvest Date: 2024-07-29T04:01:24.000Z