U.S. flag

An official website of the United States government

icon-dot-gov

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

icon-https

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Shapefiles of the flood-inundation maps for the St. Joseph River at Elkhart, Indiana

Digital flood-inundation maps for a 6.6-mile reach of the St. Joseph River at Elkhart, Indiana were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind. Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/, which also forecasts flood hydrographs at this site (NWS site EKMI3). Flood profiles were computed for the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind., reach by means of a one-dimensional step-backwater hydraulic modeling software developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated using the current stage-discharge rating at the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind. The hydraulic model was then used to compute 6 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum ranging from 23.0 ft (the NWS “action stage”) to 28.0 ft, which is the highest stage interval of the current USGS stage-discharge rating curve and 1 ft higher than the NWS “major flood stage.” The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model (derived from light detection and ranging [lidar]) data having a 0.49-ft root mean squared error and 4.9-ft horizontal resolution) to delineate the area flooded at each stage. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Get Data and Metadata
Author(s) Zachary W. Martin orcid
Publication Date 2017-02-01
Beginning Date of Data 2011-10-01
Ending Date of Data 2011-10-01
Data Contact
DOI https://doi.org/10.5066/F7QZ2836
Citation Martin, Z.W., 2017, Shapefiles of the flood-inundation maps for the St. Joseph River at Elkhart, Indiana: U.S. Geological Survey data release, https://doi.org/10.5066/F7QZ2836.
Metadata Contact
Metadata Date 2020-08-27
Related Publication
Citations of these data

Loading https://doi.org/10.3133/sir20165179

Access public
License http://www.usa.gov/publicdomain/label/1.0/
Loading...
Harvest Source: ScienceBase
Harvest Date: 2021-11-19T04:42:53.907Z