MODFLOW 2005 data sets for the simulation of potential increased inundation in flood-prone regions of Southeast Florida in response to climate and sea-level changes in Broward County, Florida, 2060-69

Jeremy D. Decker 2018 MODFLOW 2005 data sets for the simulation of potential increased inundation in flood-prone regions of Southeast Florida in response to climate and sea-level changes in Broward County, Florida, 2060-69 Version 1.0 groundwater model Reston, VA, USA U.S. Geological Survey https://doi.org/10.5066/P9E6INWZ Jeremy D. Decker Joseph D. Hughes Eric D. Swain 2018 Potential for Increased Inundation in Flood-Prone Regions of Southeast Florida in Response to Climate and Sea-Level Changes in Broward County, Florida, 2060–69 Publication Scientific Investigations Report 2018-5125 Reston, VA, USA U.S. Geological Survey https://doi.org/10.3133/sir20185125 Two transient surface-water/groundwater models were developed to study the potential for increased inundation and flooding in eastern Broward County due to changes in future climate and sea-level rise. These models were constructed by using a modified version of MODFLOW 2005, with the surface-water system represented by using the surface-water routing process (SWR1) and a new Urban Runoff (URO) process. The models were used to simulate an historical period (1990-99) using measured input data and a base-case (1990–99) and a future period (2060–69) using regional climate model rainfall and potential evapotranspiration output. Model construction relied heavily on a previously created variable density model of the same study area. This USGS data release contains all of the input and output files as well as the executables required to reproduce the simulations described in the associated model documentation report. (https://doi.org/10.3133/sir20185125) The models were created to examine the potentional effects of possible future climate and sea-level changes on groundwater levels and the surface-water system in urban Broward County, FL. The development of the model input and output files included in this data release are documented in the associated Scientific Investigations Report 2018-5125 report (https://doi.org/10.3133/sir20185125). Support is provided for correcting errors in the data release and clarification of the modeling conducted by the U.S. Geological Survey. Users are encouraged to review the model documentation report to understand the purpose, construction, and limitations of this model. The models will run successfully only if the original directory structure is correctly restored. The model archive is broken into several pieces to reduce the likelihood of download timeouts. Instructions for reconstructing the original directory structure and running the models included in this data release and described in the model documentation report can be found in the readme.txt ASCII file which can be downloaded as part of this data release. 19700101 20110531 publication date Complete Not planned -80.780 -80.018 26.487 25.919 USGS Thesaurus usgsgroundwatermodel MODFLOW-2005 Groundwater InlandWaters Groundwater Model Surface-water Surface-water routing Urban Runoff Process ISO 19115 Topic Category geoscientificInformation inlandWaters environment USGS Metadata Identifier USGS:b703e5ab-0231-4d18-a9bf-e3933ffe7594 Geographic Names Information System Florida Broward County None. Acknowledgement of the U.S. Geological Survey would be appreciated in products derived from this data release. none Jeremy Decker U.S. Geological Survey mailing

3321 College Avenue

Davie FL 33314 USA 954-377-5965 jdecker@usgs.gov https://water.usgs.gov/GIS/browse/SIR2018-5125Thumbnail.jpg Image of the model domain and active area of the model. jpg Prepared in cooperation with Broward County Environmental Planning and Resilience Division None Unclassified None Joseph D. Hughes Dorothy F. Sifuentes Jeremy T. White 2016 Simulated Effects of Alterations to the Hydrologic System on the Distribution of Salinity in the Biscayne Aquifer in Broward County, Florida Publication Scientific Investigations Report 2016-5022 Reston, VA, USA U.S. Geological Survey https://doi.org/10.3133/sir20165022 Joseph D. Hughes Dorothy F. Sifuentes Jeremy T. White 2016 SEAWAT model used to evaluate the potential effects of alterations to the hydrologic system on the distribution of salinity in the Biscayne aquifer in Broward County, Florida Version 1.1 groundwater model Reston, VA, USA U.S. Geological Survey https://doi.org/10.5066/F7PV6HFR Data used for this study relied on information from another study and model. This other model was calibrated using data from 1970 to 2012, the period for which data are most complete and reliable, and was used to simulate historical conditions from 1950 to 2012. The calibration process was constrained by water-level data from 15 groundwater monitoring wells and water-quality data from 11 groundwater monitoring wells, and chloride concentrations at 9 well fields. No further, formal calibration was performed for this study. No formal logical accuracy tests were conducted Data set is considered complete for the information presented, as described in the abstract. Users are advised to read the rest of the metadata record and the associated model documentation report (https://doi.org/10.3133/sir20185125) for additional details. No formal positional accuracy tests were conducted No formal positional accuracy tests were conducted The process used to develop, calibrate, and apply the groundwater model is fully described in the model documentation report (SIR2018-5125)(https://doi.org/10.3133/sir20185125). 2018 raster pixel Transverse Mercator 0.99994118 -81.0 24.33333333 656166.66666667 0.0 row and column 166.67 166.67 feet North American Vertical Datum of 1988 1.0 feet Attribute values SIR2018_5125.shp ESRI Polygon shapefile U.S. Geological Survey Area Text string indicating is polygon area is active or inactive in the model. http://doi.org/10.3133/sir20185125 usgsgroundwatermodel Delineation of active and inactive areas in the model. http://doi.org/10.3133/sir20185125 Decker, J.D., 2018, MODFLOW 2005 data sets for the simulation of potential increased inundation in flood-prone regions of Southeast Florida in response to climate and sea-level changes in Broward County, Florida, 2060-69: U.S. Geological Survey data release https://doi.org/10.5066/P9E6INWZ U.S. Geological Survey Michael Ierardi mailing and physical

445 National Center

Reston Virginia 20192 USA 1-888-275-8747 (1-888-ASK-USGS) mierardi@usgs.gov The data have been approved for release by the U.S. Geological Survey (USGS). Although the data have been subjected to rigorous review and are substantially complete, the USGS reserves the right to revise the data pursuant to further analysis and review. Furthermore, the data are released on the condition that neither the USGS nor the U.S. Government shall be held liable for any damages resulting from authorized or unauthorized use. Although the data, software, and related material have been processed successfully on a computer system at the USGS, no warranty expressed or implied is made regarding the display or utility of the data for other purposes, nor on all computer systems, nor shall the act of distribution constitute any such warranty. The USGS or the U.S. Government shall not be held liable for improper or incorrect use of the data described and/or contained herein. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. readme.txt 1.0 ASCII text file This ASCII text file describes the model data release. This file also includes instructions on how to run the models contained in this data release and information on data files. .045 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/readme.txt modelgeoref.txt 1.0 ASCII text file This ASCII text file defines the four corners of the model domain in decimal degrees. 0.001 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/modelgeoref.txt ancillary.zip 1.0 ZIP This ZIP file contains contains additional data files and executables to postprocess county- and local-scale model results and produce local-scale model input. 0.915 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/ancillary.zip source.zip 1.0 ZIP file ZIP file containing the source code for modified version of MODFLOW 2005 that includes Urban Runoff Process (URO) and associated readme file. 0.675 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/source.zip bin.zip 1.0 ZIP file ZIP file containing the compiled modified MODFLOW 2005 model software for PC 3.171 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/bin.zip georef.zip 1.0 ZIP file ZIP file containing a shapefile which defines the extent of the model domain and active portions of the model. 0.013 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/georef.zip model.county_scale.zip 1.0 ZIP file This ZIP file contains the input files for simulations of the the various model scenarios for the county-scale model using CCSM and HadCM3 climate data and low, medium, and high sea-level rise estimates. 2251.732 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/model/model.county_scale.zip model.local_scale.zip 1.0 ZIP file This ZIP file contains the input files for simulations of the the various model scenarios for the local-scale model using CCSM and HadCM3 climate data and low, medium, and high sea-level rise estimates. 1347.209 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/model/model.local_scale.zip output.county_CCSM_base_case1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale ccsm, base case model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1960.701 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_base_case/output.county_CCSM_base_case1.zip output.county_CCSM_base_case2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale ccsm, base case model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1400.227 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_base_case/output.county_CCSM_base_case2.zip output.county_CCSM_high_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale CCSM, high slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1895.813 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_high_slr/output.county_CCSM_high_slr1.zip output.county_CCSM_high_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale CCSM, high slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1397.936 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_high_slr/output.county_CCSM_high_slr2.zip output.county_CCSM_high_slr_mods13p1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale CCSM, high slr model scenario with modified S13P operations. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1898.411 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_high_slr_modS13P/output.county_CCSM_high_slr_modS13P1.zip output.county_CCSM_high_slr_modS13P2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale CCSM, high slr model scenario with modified S13P operations. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1398.240 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_high_slr_modS13P/output.county_CCSM_high_slr_modS13P2.zip output.county_CCSM_low_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale CCSM, low slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1953.328 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_low_slr/output.county_CCSM_low_slr1.zip output.county_CCSM_low_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale CCSM, low slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1400.179 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_low_slr/output.county_CCSM_low_slr2.zip output.county_CCSM_med_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale CCSM, medium slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1940.554 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_med_slr/output.county_CCSM_med_slr1.zip output.county_CCSM_med_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale CCSM, med slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1399.825 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_CCSM_med_slr/output.county_CCSM_med_slr2.zip output.county_hadcm3_base_case1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, base case model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1959.915 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_base_case/output.county_HadCM3_base_case1.zip output.county_HadCM3_base_case2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, base case model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1400.091 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_base_case/output.county_HadCM3_base_case2.zip output.county_HadCM3_high_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, high slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1897.626 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_high_slr/output.county_HadCM3_high_slr1.zip output.county_HadCM3_high_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, high slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1398.234 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_high_slr/output.county_HadCM3_high_slr2.zip output.county_HadCM3_high_slr_modS13P1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, high slr model scenario with modified S13P operations. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1900.020 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_high_slr_modS13P/output.county_HadCM3_high_slr_modS13P1.zip output.county_HadCM3_high_slr_modS13P2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, high slr model scenario with modified S13P operations. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1398.594 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_high_slr_modS13P/output.county_HadCM3_high_slr_modS13P2.zip output.county_hadcm3_low_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, low slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1957.806 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_low_slr/output.county_HadCM3_low_slr1.zip output.county_HadCM3_low_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, low slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1400.562 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_low_slr/output.county_HadCM3_low_slr2.zip output.county_HadCM3_med_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, medium slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1944.054 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_med_slr/output.county_HadCM3_med_slr1.zip output.county_HadCM3_med_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale hadcm3, med slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1400.315 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_HadCM3_med_slr/output.county_HadCM3_med_slr2.zip output.county_historical1.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale historical model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 1959.107 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_historical/output.county_historical1.zip output.county_historical2.zip 1.0 ZIP file This ZIP file contains the partial output data for the county-scale historical model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 1400.564 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.county_historical/output.county_historical2.zip output.local_CCSM_base_case1.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale ccsm, base case model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 2609.733 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_CCSM_base_case/output.local_CCSM_base_case1.zip output.local_CCSM_base_case2.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale ccsm, base case model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 198.964 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_CCSM_base_case/output.local_CCSM_base_case2.zip output.local_CCSM_high_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale CCSM, high slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 2482.821 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_CCSM_high_slr/output.local_CCSM_high_slr1.zip output.local_CCSM_high_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale CCSM, high slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 199.797 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_CCSM_high_slr/output.local_CCSM_high_slr2.zip output.local_CCSM_low_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale CCSM, low slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 2595.276 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_CCSM_low_slr/output.local_CCSM_low_slr1.zip output.local_CCSM_low_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale CCSM, low slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 199.445 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_CCSM_low_slr/output.local_CCSM_low_slr2.zip output.local_CCSM_med_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale CCSM, medium slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 2561.778 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_CCSM_med_slr/output.local_CCSM_med_slr1.zip output.localy_CCSM_med_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale CCSM, med slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 199.493 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_CCSM_med_slr/output.local_CCSM_med_slr2.zip output.local_HadCM3_base_case1.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale hadcm3, base case model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 2609.461 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_HadCM3_base_case/output.local_HadCM3_base_case1.zip output.local_HadCM3_base_case2.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale hadcm3, base case model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 199.057 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_HadCM3_base_case/output.local_HadCM3_base_case2.zip output.local_HadCM3_high_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale hadcm3, high slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 2476.601 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_HadCM3_high_slr/output.local_HadCM3_high_slr1.zip output.local_HadCM3_high_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the localy-scale hadcm3, high slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 199.681 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_HadCM3_high_slr/output.local_HadCM3_high_slr2.zip output.local_HadCM3_low_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale hadcm3, low slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 2603.1676 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_HadCM3_low_slr/output.local_HadCM3_low_slr1.zip output.local_HadCM3_low_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale hadcm3, low slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 199.343 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_HadCM3_low_slr/output.local_HadCM3_low_slr2.zip output.local_HadCM3_med_slr1.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale hadcm3, medium slr model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 2565.555 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_HadCM3_med_slr/output.local_HadCM3_med_slr1.zip output.local_HadCM3_med_slr2.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale hadcm3, med slr model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 199.354 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_HadCM3_med_slr/output.local_HadCM3_med_slr2.zip output.local_historical1.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale historical model scenario. The directory contains output files with the suffixes .hds and .str, which respectively contain the binary groundwater head elevations and SWR1 structure flow output. 2602.1637 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_historical/output.local_historical1.zip output.local_historical2.zip 1.0 ZIP file This ZIP file contains the partial output data for the local-scale historical model scenario. The directory contains output files with the suffixes .lst and .aqx, which respectively contain the main output and SWR1 aquifer exchange output. 199.268 https://water.usgs.gov/GIS/dsdl/gwmodels/sir2018-5125/output/output.local_historical/output.local_historical2.zip None 20201117 U.S. Geological Survey Ask USGS -- Water Webserver Team mailing

445 National Center

Reston VA 20192 1-888-275-8747 (1-888-ASK-USGS) mierardi@usgs.gov FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998