<?xml version='1.0' encoding='UTF-8'?>
<metadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <idinfo>
    <citation>
      <citeinfo>
        <origin>United States Geological Survey</origin>
        <pubdate>2011</pubdate>
        <title>National Assessment of Oil and Gas Project  Anadarko Basin Province (058) Total Petroleum Systems</title>
        <geoform>Downloadable GIS Data</geoform>
        <pubinfo>
          <pubplace>Reston,VA</pubplace>
          <publish>U. S. Geological Survey, Energy Resources Science Center</publish>
        </pubinfo>
        <onlink>https://doi.org/10.5066/P9OJ5S2Y</onlink>
        <lworkcit>
          <citeinfo>
            <origin>Higley, Debra</origin>
            <pubdate>2011</pubdate>
            <title>Assessment of Undiscovered Oil and Gas Resources of the Anadarko Basin Province of Oklahoma, Kansas, Texas, and Colorado, 2010</title>
            <serinfo>
              <sername>USGS Fact Sheet</sername>
              <issue>Fact Sheet 2011-3003</issue>
            </serinfo>
            <pubinfo>
              <pubplace>Denver, Colorado</pubplace>
              <publish>U.S. Geological Survey, Energy Resources Science Center</publish>
            </pubinfo>
            <onlink>https://pubs.usgs.gov/fs/2011/3003/</onlink>
          </citeinfo>
        </lworkcit>
      </citeinfo>
    </citation>
    <descript>
      <abstract>The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources.  The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).</abstract>
      <purpose>The purpose of this map is to define and illustrate the geographic limit and geologic boundaries of the Total Petroleum System as required for the USGS National Assessment of Oil and Gas Project.  The boundaries define the combined limits of the petroleum system elements -- source rock, reservoir rock, seal rock, and trap -- which are described and defined in the text portions of this publication.</purpose>
    </descript>
    <timeperd>
      <timeinfo>
        <sngdate>
          <caldate>2011</caldate>
        </sngdate>
      </timeinfo>
      <current>publication date</current>
    </timeperd>
    <status>
      <progress>Complete</progress>
      <update>As needed</update>
    </status>
    <spdom>
      <bounding>
        <westbc>-104.5</westbc>
        <eastbc>-97.00</eastbc>
        <northbc>39.75</northbc>
        <southbc>34.25</southbc>
      </bounding>
    </spdom>
    <keywords>
      <theme>
        <themekt>Central Energy Resources Team Keyword Thesaurus</themekt>
        <themekey>National Assessment of Oil and Gas</themekey>
        <themekey>USGS World Energy Region 5</themekey>
        <themekey>Energy Resources</themekey>
        <themekey>Oil</themekey>
        <themekey>Natural Gas</themekey>
        <themekey>Resource Assessment</themekey>
        <themekey>Earth Science</themekey>
        <themekey>Natural Resources</themekey>
        <themekey>U.S. Geological Survey</themekey>
        <themekey>USGS</themekey>
        <themekey>Geology</themekey>
        <themekey>Total Petroleum System</themekey>
        <themekey>Higley, D.</themekey>
      </theme>
      <theme>
        <themekt>Gateway to the Earth draft 9 28-Jun-2002</themekt>
        <themekey>Oil shale resources</themekey>
        <themekey>Oil sand resources</themekey>
        <themekey>Coalbed methane resources</themekey>
        <themekey>Gas hydrate resources</themekey>
        <themekey>Natural gas resources</themekey>
        <themekey>Economic geology</themekey>
      </theme>
      <theme>
        <themekt>ISO 19115 Topic Category</themekt>
        <themekey>geoscientificInformation</themekey>
      </theme>
      <theme>
        <themekt>EnergyResourceActivities</themekt>
        <themekey>oilgas</themekey>
        <themekey>noga2000</themekey>
        <themekey>nogaanadarko</themekey>
      </theme>
      <theme>
        <themekt>USGS Metadata Identifier</themekt>
        <themekey>USGS:60c8c754d34e86b9389dc6f0</themekey>
      </theme>
      <place>
        <placekt>none</placekt>
        <placekey>United States</placekey>
        <placekey>USGS World Energy Region 58</placekey>
        <placekey>Anadarko Basin</placekey>
        <placekey>CO</placekey>
        <placekey>KS</placekey>
        <placekey>OK</placekey>
        <placekey>TX</placekey>
      </place>
      <place>
        <placekt>Augmented FIPS 10-4 and FIPS 6-4, version 1.0</placekt>
        <placekey>US08 = Coloroado</placekey>
        <placekey>US20 = Kansas</placekey>
        <placekey>US40 = Oklahoma</placekey>
        <placekey>US48 = Texas</placekey>
      </place>
      <place>
        <placekt>USGS Oil and Gas Provinces (NOGA-95)</placekt>
        <placekey>Anadarko Basin</placekey>
      </place>
      <place>
        <placekt>USGS Oil and Gas Total Petroleum Systems (NOGA-2000)</placekt>
        <placekey>505801 = Woodford Composite</placekey>
        <placekey>505802 = Pennsylvanian Composite</placekey>
      </place>
      <place>
        <placekt>USGS Oil and Gas Assessment Units (NOGA-2000)</placekt>
        <placekey>50580101 = Anadarko Basin</placekey>
        <placekey>50580102 = Woodford Composite</placekey>
        <placekey>50580103 = Arbuckle-Ellenburger</placekey>
        <placekey>50580104 = Hunton Group</placekey>
        <placekey>50580105 = Mississippian</placekey>
        <placekey>50580161 = Woodford Shale Gas</placekey>
        <placekey>50580201 = Morrowan-Atokan</placekey>
        <placekey>50580202 = Desmoinesian</placekey>
        <placekey>50580203 = Missourian-Permian</placekey>
        <placekey>50580204 =Greater Granite Wash Composite</placekey>
        <placekey>50580261 = Thirteen Finger-Atokan Shale</placekey>
      </place>
    </keywords>
    <accconst>None</accconst>
    <useconst>None</useconst>
    <ptcontac>
      <cntinfo>
        <cntorgp>
          <cntorg>U.S. Geological Survey - CERSC Data Management Services Project</cntorg>
        </cntorgp>
        <cntaddr>
          <addrtype>mailing and physical</addrtype>
          <address>Denver Federal Center, Building 25, Mail Stop 939</address>
          <city>Denver</city>
          <state>CO</state>
          <postal>80225</postal>
          <country>USA</country>
        </cntaddr>
        <cntvoice>1-888-275-8747</cntvoice>
        <cntemail>datamgt@usgs.gov</cntemail>
      </cntinfo>
    </ptcontac>
  </idinfo>
  <dataqual>
    <logic>The Total Petroleum System was defined on the basis of mapping the surface and subsurface geology of the source rock(s) from the literature and well data files, and by burial and thermal history modeling the source-rock stratigraphic intervals.  The province geologist was required to defend the geologic boundaries and geologic history of each Total Petroleum System in a formal petroleum system review meeting.</logic>
    <complete>The Total Petroleum System was mapped from published literature, interpretations of in-house geophysical well logs, thermal- and burial-history modeling, and on the data contained in the IHS Energy Group, WHCS data base for wells (2009 update), and the Nehring Significant Oil and Gas Field File (2009 update).</complete>
    <posacc>
      <horizpa>
        <horizpar>The Total Petroleum System boundary represents the gross boundary of the combined geologic elements that comprise the Total Petroleum System.  The Total Petroleum System boundary was mapped on a 1:2,000,000-scale hard copy base map by the province geologist and the boundary line digitally transferred using ArcGIS.   The Total Petroleum System boundary lines are not intended for use at a scale greater than 1:2,000,000.</horizpar>
      </horizpa>
    </posacc>
    <lineage>
      <procstep>
        <procdesc>The province geologist mapped the Total Petroleum System boundary on a hard copy base map at 1:2,000,000 provided by the project after plotting all available geologic and geophysical well data and information on the hard copy base map. Similarly, data contained in the IHS Energy Group, WHCS data base for wells (2009 update), and the Nehring Significant Oil and Gas Field File (2009 update) were plotted on the base map for reference.  Following review, the Total Petroleum System boundary was digitally transferred from the hard copy base map using ArcGIS.</procdesc>
        <procdate>Unknown</procdate>
      </procstep>
      <procstep>
        <procdesc>Metadata imported.</procdesc>
        <srcused>C:\DOCUME~1\ggunther\LOCALS~1\Temp\xmlDB.tmp</srcused>
        <procdate>20110524</procdate>
        <proctime>15134400</proctime>
      </procstep>
    </lineage>
  </dataqual>
  <spdoinfo>
    <direct>Vector</direct>
    <ptvctinf>
      <sdtsterm>
        <sdtstype>Complete chain</sdtstype>
      </sdtsterm>
      <sdtsterm>
        <sdtstype>Entity point</sdtstype>
      </sdtsterm>
      <sdtsterm>
        <sdtstype>GT-polygon composed of chains</sdtstype>
      </sdtsterm>
      <sdtsterm>
        <sdtstype>Point</sdtstype>
      </sdtsterm>
    </ptvctinf>
  </spdoinfo>
  <spref>
    <horizsys>
      <geograph>
        <latres>0.000001</latres>
        <longres>0.000001</longres>
        <geogunit>Decimal degrees</geogunit>
      </geograph>
      <geodetic>
        <horizdn>North American Datum of 1983</horizdn>
        <ellips>Geodetic Reference System 80</ellips>
        <semiaxis>6378137.0</semiaxis>
        <denflat>298.257222</denflat>
      </geodetic>
    </horizsys>
  </spref>
  <eainfo>
    <detailed>
      <enttyp>
        <enttypl>tps"tpsnum"g.pat or tps"tpsnum"g.dbf</enttypl>
        <enttypd>Polygon Attribute Table.  For each Total Petroleum System (TPS), "tpsnum" is replaced with the TPS number in tps"tpsnum"g.pat and tps"tpsnum"g.dbf.  To keep the size of filenames less than 10 characters, "tpsnum" does not include the first 2 characters of the region/province number.</enttypd>
        <enttypds>U.S. Geological Survey</enttypds>
      </enttyp>
      <attr>
        <attrlabl>REG_NUM</attrlabl>
        <attrdef>Region Number</attrdef>
        <attrdefs>U.S. Geological Survey Energy Resource World Regions</attrdefs>
        <attrdomv>
          <edom>
            <edomv>5</edomv>
            <edomvd>North America</edomvd>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>REG_NAME</attrlabl>
        <attrdef>Region Name</attrdef>
        <attrdefs>U.S. Geological Survey Energy Resource World Regions</attrdefs>
        <attrdomv>
          <edom>
            <edomv>North America</edomv>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>PROVCODE</attrlabl>
        <attrdef>Province Code</attrdef>
        <attrdefs>U.S. Geological Survey Energy Resource Provinces</attrdefs>
        <attrdomv>
          <edom>
            <edomv>5058</edomv>
            <edomvd>Anadarko Basin</edomvd>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>PROV_NAME</attrlabl>
        <attrdef>Province Name</attrdef>
        <attrdefs>U.S. Geological Survey Energy Resource Provinces</attrdefs>
        <attrdomv>
          <edom>
            <edomv>Anadarko Basin</edomv>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>TPSCODE</attrlabl>
        <attrdef>Total Petroleum System Code</attrdef>
        <attrdefs>U.S. Geological Survey Energy Resource Total Petroleum Systems</attrdefs>
        <attrdomv>
          <edom>
            <edomv>505801</edomv>
            <edomvd>Woodford Composite</edomvd>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>505802</edomv>
            <edomvd>Pennsylvanian Composite</edomvd>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>TPSNAME</attrlabl>
        <attrdef>Total Petroleum System Name</attrdef>
        <attrdefs>U.S. Geological Survey Energy Resource Total Petroleum Systems</attrdefs>
        <attrdomv>
          <edom>
            <edomv>Woodford Composite</edomv>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>Pennsylvanian Composite</edomv>
          </edom>
        </attrdomv>
      </attr>
    </detailed>
  </eainfo>
  <distinfo>
    <distrib>
      <cntinfo>
        <cntorgp>
          <cntorg>U.S. Geological Survey - ScienceBase</cntorg>
        </cntorgp>
        <cntaddr>
          <addrtype>mailing and physical</addrtype>
          <address>Denver Federal Center, Building 810, Mail Stop 302</address>
          <city>Denver</city>
          <state>CO</state>
          <postal>80225</postal>
          <country>USA</country>
        </cntaddr>
        <cntvoice>1-888-275-8747</cntvoice>
        <cntemail>sciencebase@usgs.gov</cntemail>
      </cntinfo>
    </distrib>
    <resdesc>Downloadable Data</resdesc>
    <distliab>Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty.</distliab>
    <stdorder>
      <digform>
        <digtinfo>
          <formname>Shapefile</formname>
        </digtinfo>
        <digtopt>
          <onlinopt>
            <computer>
              <networka>
                <networkr>https://doi.org/10.5066/P9OJ5S2Y</networkr>
              </networka>
            </computer>
          </onlinopt>
        </digtopt>
      </digform>
    </stdorder>
  </distinfo>
  <metainfo>
    <metd>20210615</metd>
    <metrd>20091015</metrd>
    <metc>
      <cntinfo>
        <cntorgp>
          <cntorg>U.S. Geological Survey - CERSC Data Management Services Project</cntorg>
        </cntorgp>
        <cntaddr>
          <addrtype>mailing and physical</addrtype>
          <address>Denver Federal Center, Building 25, Mail Stop 939</address>
          <city>Denver</city>
          <state>CO</state>
          <postal>80225</postal>
          <country>USA</country>
        </cntaddr>
        <cntvoice>1-888-275-8747</cntvoice>
        <cntemail>datamgt@usgs.gov</cntemail>
      </cntinfo>
    </metc>
    <metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
    <metstdv>FGDC-STD-001-1998</metstdv>
  </metainfo>
</metadata>
