Michaela R. Johnson, Jennifer S. Stanton, James F. Cornwall, and Matthew K. Landon, U.S. Geological Survey 20020228 digital vector data USGS Open-File Report USGS OFR 02-81 Reston, VA U.S. Geological Survey https://water.usgs.gov/lookup/getspatial?ofr0281_oct75 This arc and point data set contains streamflow-measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along Republican River tributaries in Dundy and Chase Counties, Nebraska during October 6 to 8, 1975 (U.S. Geological Survey, 1977). The streamflow measurements were made to obtain data on ground-water/surface-water interaction. Flow was observed visually to be zero, was measured, or was estimated at 64 sites. Tributaries were followed upstream until the first road crossing where zero flow was encountered. For selected streams, points of zero flow upstream of the first zero flow site also were checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. This digital data set was created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every streamflow measurement site. Each set of stream segments between measurement sites was assigned a unique reach number. This data set was created to archive the calculated streamflow gains and losses of tributary streams to the Republican River in Dundy and Chase Counties, Nebraska in October 1975, and make the data available for use with geographic information systems (GIS). This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate steam-reach segments to calculate gain/loss per river mile. Reach segments were created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream reach segment between streamflow measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. Related_Spatial_and_Tabular_Data_Sets: Streamflow gain/loss in the Republican River Basin, Nebraska for: May 1975 (<https://water.usgs.gov/lookup/getspatial?ofr0279_may75>) July 1975 (<https://water.usgs.gov/lookup/getspatial?ofr0280_jul75>) October 1978 (<https://water.usgs.gov/lookup/getspatial?ofr0283_oct78>) April-May 1980 (<https://water.usgs.gov/lookup/getspatial?ofr0284_may80>) October 1980 (<https://water.usgs.gov/lookup/getspatial?ofr0285_oct80>) October 1981 (<https://water.usgs.gov/lookup/getspatial?ofr0286_oct81>) March 1989 (<https://water.usgs.gov/lookup/getspatial?ofr0287_mar89>) October 1998 (<https://water.usgs.gov/lookup/getspatial?ofr0288_oct98>) References Soenksen, P.J., Miller, L.D., Sharpe, J.B., and Watton, J.B., 1999, Peak- flow frequency relations and evaluation of the peak-flow gaging network in Nebraska: U.S. Geological Survey Water-Resources Investigations Report 99-4032, 47 p. U.S. Geological Survey, 1977, Water Resources Data, Nebraska, Water Year 1976: U.S. Geological Survey Water-Data Report NE-76-1, p. 340-341. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this Federal Geographic Data Committee-compliant metadata file is intended to document the data set in nonproprietary form, as well as in ArcInfo format, this metadata file may include some ArcInfo-specific terminology. 19751006 19751008 Ground condition Complete None planned -101.99621107 -101.31058496 40.69097888 40.03232033 USGS Thesaurus Republican River Republican River Basin seepage run gain/loss streamflow low flow investigations base flow hydrography inlandWaters ISO 19115 Topic Category geoscientificInformation inlandWaters environment USGS Metadata Identifier USGS:3a62f93d-1b51-46e7-97c3-2e8030a7a036 Geographic Names Information System Republican River Basin Nebraska Dundy County Chase County none The locations of stream measurement points were digitized from 1:126,720-scale county road maps. The corresponding stream reaches were derived from a 1:250,000 hydrography coverage (Soenksen and others, 1999). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000. Michaela R. Johnson U.S. Geological Survey GIS Specialist Mailing and physical

Federal Building, Room 406

100 Centennial Mall North

Lincoln NE 68508 USA 1-888-275-8747 (402) 437-5139 mrjohns@usgs.gov The Nebraska Republican River Basin Management Districts and the Southwest Nebraska Resource Conservation and Development Area are thanked for their support of this project. The Nebraska Republican River Basin Management Districts include the Upper Republican, Middle Republican, Lower Republican, and Tri-Basin Natural Resources Districts (NRDs), and the Frenchman-Cambridge, Frenchman Valley, Hitchcock and Red Willow, and Nebraska Bostwick Irrigation Districts. The funding for this project was provided by a grant from the Nebraska Environmental Trust Fund to the Nebraska Republican River Basin Management Districts, U.S. Geological Survey cooperative matching funds, and funds from individual NRDs. Windows_NT, 4.0, Intel ArcInfo version 8.1 Accuracy of attributes was verified by checking against the original source data for streamflow measurements to ensure valid entries. Chain-node topology present. All measurements of streamflow under base-flow conditions in October 1975 were plotted. Reaches were determined between plotted October 1975 sites when there was measurable streamflow at both upstream and downstream sites. Accuracy of the location of the plotted stream measurements was not determined. Location was digitized from 1:126,720-scale paper county road maps. All stream- reach segments are in the same position as the original 1:250,000 source coverage. U.S. Geological Survey 1977 table U.S. Geological Survey Water-Data Report NE 76-1 Lincoln, Nebraska U.S. Geological Survey Book 19751006 19751008 Ground condition USGS (1976) tables from p. 340-341 Digitized locations of stream measurments from points hand- plotted on county road maps. RMSE was not determined. 19980826 Added site identity (SITEID) attributes to join table of measured streamflow. 20001122 Added reach identity (REACHID) to join stream reach attributes from OCT75SEGS to point coverage, OCT75SEEP. REACHID is the SITEID of the downstream site defining the stream reach. 20001122 In ArcEdit: split arcs from 1:250,000 hydrography (Soenksen and others, 1999) at measurement sites and assigned REACHIDs for all arcs between measurement sites a) Deleted arcs outside of the reaches that had values b) Assigned 0 values for REACHID when no reach value could be determined 20001122 BUILD oct75segs line 20001122 ARCEDIT K:\REP_RIV\GIS\SEEPAGE\OCT75SEGS a) GENERALIZE the lines to remove exceess nodes b) UNSPLIT on REACHID 20001122 BUILD oct75segs line 20001122 Added data from the excel spreadsheet to the cover a) in excel: exported to a *.dbf file b) in ARC: DBASEINFO to convert file c) in ARC: JOINITEM to merge data on REACHID 20001122 COPY oct75segs oct75routes 20010111 arcroute oct75routes segments reachid # 'length / 1609.344' 20010111 Added reach lengths back into the excel spreadsheet a) ARC: routestats oct75routes segments oct75.measures b) ARC: joinitem oct75routes.ratsegments oct75.measures oct75.lengths segments# c) ARC: joinitem oct75segs.aat oct75.lengths oct75segs.aat REACHID d) TABLES: additem oct75segs.aat GL_RATE 4 12 f 3 e) TABLES: calc gl_rate = gainloss/measurelength f) TABLES: resel gainloss = -9999;calc gl_rate = -9999 g) TABLES: unload2 oct75.segsdata (allitems) 20010111 BUILD oct75segs line 20010118 COPY oct75segs oct75 20020131 Combined streamflow measurement sites (OCT75SEEP) and reach segments (OCT75SEGS) into one coverage with point and arc features ARCEDIT S:\REP_RIV\GIS\SEEPAGE\OCT75 get oct75seep;q;y;y; 20020131 BUILD OCT75 point BUILD OCT75 arc 20020131 First draft of metadata created by mrjohns using FGDCMETA.AML ver. 1.36 01/16/01 on ArcInfo data set s:\rep_riv\gis\seepage\oct75 20020131 Vector Point 63 String 36 Albers Conical Equal Area 29.5 45.5 -96 23 0.00000 0.00000 coordinate pair 7.0724 7.0724 Meters North American Datum of 1983 GRS1980 6378206.4 294.98 > >OCT75.PAT: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 AREA 4 12 F 3 > 5 PERIMETER 4 12 F 3 > 9 OCT75# 4 5 B - > 13 OCT75-ID 4 5 B - > 17 SITEID 4 5 B - > 21 FLOW1075 4 8 F 2 > 25 REACHID 8 20 F 0 > 33 UPSITEID 4 5 B - > 37 FLOW_ERR 4 8 F 4 > 41 NOTES 75 75 C - > 116 LAT 4 12 F 3 > 120 LON 4 12 F 3 > 124 GAGE 10 10 C - > 134 COUNTY 10 10 C - > AREA - Area of feature in meters; 0 for point feature. PERIMETER - Perimeter of feature in meters; 0 for point feature. OCT75# - Internal sequence number (i.e. the record number) of the arc in the ARC file. OCT75-ID - User-assigned feature ID. SITEID - Stream measurement identification (ID) number. Unique positive integer to designate stream measurement site at downstream end of reach. SITEID is not in downstream order. FLOW1075 - Streamflow measured at site in cubic feet per second. REACHID - Unique ID of stream segment between UPSITEID and SITEID; REACHID is SITEID of stream measurement site at downstream end of reach. REACHID is -9999 when there is no upstream site. UPSITEID - Unique ID of measurement site at upstream end of reach; UPSITEID is -9999 when there is no site upstream. FLOW_ERR - Uncertainty in flow measurement. The value is in units of cubic feet per second indicating uncertainty in the streamflow measurement (5% of measured streamflow); FLOW_ERR is -9999 when no flow is measured. NOTES - Text describing location of streamflow measurement and other additional information. LAT - Latitude of site in geographic coordinate system in DMS format. LON - Longitude of site in geographic coordinate system in DMS format. GAGE - Streamflow-gaging station ID where streamflow measurement was made at a gaging station. Record is blank if the measurement site was not a gaging station. COUNTY - Name of county in which streamflow measurement was made. > >OCT75.AAT: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 FNODE# 4 5 B - > 5 TNODE# 4 5 B - > 9 LPOLY# 4 5 B - > 13 RPOLY# 4 5 B - > 17 LENGTH 4 12 F 3 > 21 OCT75# 4 5 B - > 25 OCT75-ID 4 5 B - > 29 REACHID 4 5 B - > 33 GAINLOSS 4 8 F 2 > 37 GL_SIG 7 7 C - > 44 MILES 4 12 F 3 > 48 GL_MILES 4 12 F 3 > 52 SIG_TYPE 4 4 C 0 > > FNODE# - Internal number of from-node. TNODE# - Internal number of to-node. LPOLY# - Internal number of the left polygon. RPOLY# - Internal number of the right polygon. LENGTH - Length of arc in meters. OCT75# - Internal sequence number (i.e. the record number) of the arc in the ARC file. OCT75-ID - User-assigned feature ID. REACHID - Unique ID of stream segment between UPSITEID and SITEID; REACHID is SITEID of stream measurement site at downstream end of reach. REACHID is -9999 when there is no upstream site. GAINLOSS - Difference in streamflow measured at downstream site (SITEID) and upstream site (UPSITEID) plus tributary inflows. Positive or negative number in cubic feet per second where value is positive in gaining reach and negative in losing reach; GAINLOSS is -9999 when there is no flow at both sites or no upstream site. GL_SIG - Text indicating whether calculated streamflow gain/loss is greater than uncertainty (FLOW_ERR) in streamflow measurement. If the absolute value of gain/loss is greater than uncertainty, gain/loss is considered to represent a real change in streamflow and GL_SIG is 'yes'. If the absolute value of gain/loss is less than or equal to uncertainty, the gain/loss could reflect measurement uncertainty and GL_SIG is 'no'. MILES - Length of stream reach between SITEID and UPSITEID in miles determined from OCT75SEGS coverage; R_LENGTH is -9999 when no site upstream. GL_MILES - GAINLOSS per river mile with units of cubic feet per second per river mile. Positive or negative number where value is positive in gaining reach and negative in losing reach; GL_MILE is -9999 when there is no flow at both sites or no upstream reach. SIG_TYPE - Text describing the interpreted significance of gain/loss for each reach segment. > >SIG_TYPE Value > >Significant gain sg >Not significant gain nsg >Not significant loss nsl >Significant loss sl >Null null > none U.S. Geological Survey Michael Ierardi IT Specialist mailing and physical

445 National Center

Reston Virginia 20192 USA 1-888-275-8747 (1-888-ASK-USGS) mierardi@usgs.gov Although this data set has been used by the U.S. Geological Survey, U.S. Department of the Interior, no warranty expressed or implied is made by the U.S. Geological Survey as to the accuracy of the data and related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the U.S. Geological Survey in the use of this data, software, or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Export Full coverage zipped 1 https://water.usgs.gov/GIS/dsdl/ofr0281_oct75.e00.gz Other DLG file format zipped 1 https://water.usgs.gov/GIS/dsdl/ofr0281_oct75_sdts.tar.gz Other DLG file format zipped 1 https://water.usgs.gov/GIS/dsdl/ofr0281_oct75_shape.tar.gz None. This dataset is provided by USGS as a public service. 20201117 U.S. Geological Survey Ask USGS -- Water Webserver Team mailing

445 National Center

Reston VA 20192 1-888-275-8747 (1-888-ASK-USGS) mierardi@usgs.gov FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998